Arzel Zoning
The Pro Panel comes with several other components included in the box. You'll find an Arzel transformer, 2 sensors, a sensor housing, a sensor bushing, screwdriver, the Pro Panel itself, and an installation manual. This unboxing video shows you what you'll see when you open the Pro Panel box, and how to use each item in your zoning installation.
Hello. Thanks for joining us today. We are going to demonstrate an unboxing of our new Pro Panel. We’re going to kind of show you some of the things you can expect to find inside when you receive it. You’ll see that all Pro Panels come with the 40 VA transformer. The same transformer comes in most of our panels. The only panel you will see that may have a different 100 VA is the Airboss. You’ll also see two sensors that come with the panel. These are important for proper operation of the panel. The panel makes decisions based on the temperatures that are read from these sensors. A sensor housing. This is important to protect the sensor from the outdoor elements. Rain, snow, what have you. It also comes with a sensor bushing. This is to protect the wire of the sensor from vibration from the equipment, severing the wire, causing any kind of shorts. Every panel should come with a screwdriver. This is to help you install the sensors. Just in case you don’t have a screwdriver with you. Feel free to take this with you or leave it in the panel for the next guy. All Pro Panels should have the red caps installed and all the solenoid ports. It’s important to note that the panel should have these caps on all ports for proper operation. So just make sure if you don’t use all the zones to keep the red caps, don’t lose them. There could be no open ports when the panel is running. And then lastly, the installation manual. The installation manual will have everything you need to know to properly install the panel. It’ll also have the QRC with it, to allow your phone to connect to the panel to set it up and, maintain proper operation. Thank you.
View Transcript