Arzel Zoning
Watch an Arzel technician connect the tubing to a Pro Panel zone control. In this video, we walk through the process of connecting tubing step by step and explain the tools and techniques used along the way.
Today I’m going to demonstrate how to connect the tubing to the Arzel panel.
One of the most unique parts about our cell zoning is that we are a pneumatic system. Arzel dampers are air driven. We do not use a 24 volt motor to power our dampers. They are powered by the pump you see here.
The air tubing I’m going to demonstrate today is comes in eight different colors. In this instance I use red for zone 1, yellow for zone 2, and green for zone 3.
Now you’re going to notice that each panel has red caps on the top, that you’re going to need to remove before you install the tubing.
Now, to differentiate each zone, we’ve stamped the zones at the top of the panel.
With the back left corner being zone 1.
Zone 2 is the back right. Zone 3. Middle left. Zone 4 is middle right.