Arzel Zoning
Watch an Arzel technician install a Pro Panel zone control. Learn how to find a good location for your zoning panel install. Then see how an expert installer attaches the panel to the wall. He'll share important tips to ensure your zoning install goes off without a hitch.
When mounting an Arzel panel, you want to try to get it in the best location. If possible, you want to mount the panel on a masonry wall. If mounting the panel on a studded wall, then you want to think about what’s on the other side of that wall. The Arzel pump is quiet, but sometimes the vibration can travel. You want to try to mount the panel close to the equipment. We recommend mounting the panel on a 3/4 inch piece of plywood like I have here, making sure that it was tightly secured to the masonry wall. I’m going to install a Pro Panel today. All of our polycarbonate enclosures have the same screw holes on the back, two larger ones on the top, and then two smaller screw holes on the bottom. I’m going to mount the prop panel using 1-inch zip screws. First, I’m going to mark the holes holding the Pro Panel up to the plywood and mark where the screw holes are going to go.
Then I’m going to take my 1-inch zip screws, partially screw the screws in. You don’t want to screw them in all the way.
And you just take the panel, hang it on the two top screws. Then I’ll secure the panel by screwing in the bottom zip screws.
Then going back and screwing in the two top screws.
Now the panel is mounted in a great location and ready for the next step.